ATV12H018M2 : 0.18KW SINGLE PHASE 200-240VAC

Functions

In addition to the functions usually available on this type of drive, the Altivar 12 drive also features the following:

Application functions (1)

•  Switching between local control and control via the terminals
• Motor control profiles: standard, performance and pump/fan b Frequency skip
• Preset speeds
• PID regulator
• S ramp, U ramp, ramp switching
• Freewheel stop, fast stop
• Jog operation
• Configuring the logic and analog I/O
• Underload and overload detection
• Viewing the state of the logic inputs on the drive display b Configuring how the parameters are displayed
• Error log, etc.

Functions for pumping applications

• Sleep/wake-up
• PID functions
• Protection functions :
• Protection against overloads and overcurrents in continuous operation (pump jamming)
• Machine mechanical protection with control of operating direction
• Protection of the installation by means of underload and overload detection

An optimized offer

The Altivar 12 range of variable speed drives extends across a range of motor power ratings from 0.18 kW/0.25 HP to 4 kW/5 HP on three types of power supply: Two standard versions are available:
Drive with heatsink for normal environments and fan-cooled enclosure:

• 100…120 V single-phase, 0.18 kW/0.25 HP to 0.75 kW/1 HP (ATV12HpppF1)
•  200…240 V single-phase, 0.18 kW/0.25 HP to 2.2 kW/3 HP (ATV12HpppM2)
•  200…240 V three-phase, 0.18 kW/0.25 HP to 4 kW/5 HP (ATV12HpppM3)

Drive on a base plate for mounting on the machine frame; the frame surface area should allow heat to dissipate:

• 100…120 V single-phase, 0.18 kW/0.25 HP to 0.37 kW/0.5 HP (ATV12H018F1, P037F1)
• 200…240 V single-phase, 0.18 kW/0.25 HP to 0.75 kW/1 HP (ATV12H018M2, PpppM2)
• 200…240 V three-phase, 0.18 kW/0.25 HP to 4 kW/5 HP (ATV12H018M3, PpppM3)

Note: The Altivar 12 drive output voltage is 200…240 V three-phase, regardless of the type of drive line supply.

The Altivar 12 drive integrates as standard the Modbus communication protocol, which can be accessed via the RJ45 connector located on the underside of the drive 1 with a 2-wire RS 485 physical interface. To communicate on the network, the Altivar 12 speed drive uses the Modbus RTU transmission mode. For more information on the complementary characteristics of the Modbus port (transmission speed, address, messaging…), please consult our website www.schneider-electric.com.

The entire range conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3, is UL, CSA, C-Tick, NOM, GOST certified and has been developed to meet the requirements of directives regarding the protection of the environment (RoHS, WEEE) as well as those of European Directives to obtain the e mark.